BFH040FRAE
12V Hazloc® NiMH Cordless Screwdriver Kit, with L.E.D. Light
BFH040FRAE

12V Hazloc® NiMH Cordless Screwdriver Kit, with L.E.D. Light

  • TECHNOLOGY : Torque-specific (7 - 40 in.lbs.) for consistent fastenings within Class I, Division 2 environments
  • ACCURACY : Torque accuracy of +/-10%. Automatically shuts off when pre-set fastening torque is reached
  • CONVENIENCE : Auto Battery Shut off (ABS) disables the tool once battery capacity drops below 5%
  • PRECISION : Precision sensor (light and/or beeping) for low battery, sufficient/insufficient fastening
  • INCLUDES : 2 ea. 2.0Ah Makstar™ battery, charger, torque adjustment key, tool case
BFH040FRAE

About Model

Makita Hazloc® screwdrivers are the only UL-approved battery operated tools that are certified for operation in Class 1, Division 2 hazardous environments as defined by the National Electric Code. Makita Hazloc® tools offer precision fastening and are engineered for specific use in military and civilian aerospace applications.

The 12V Hazloc® NiMH Cordless Screwdriver Kit, with L.E.D. Light (model BFH040FRAE) has a torque-specific range of 7 - 40 in.lbs. for consistent fastenings within Class I, Division 2 Environments, and meets NEC Article 513 Aircraft Hangar requirements for Class I, Division 2 environments. Application expectations achieve consistent fastenings within 5% of mean torque. Added features include an L.E.D. loamp, L.E.D. Pass/Fail, and an audible signal.

It's part of the Makita line of Assembly Tools. Makita is the industry leader in cordless clutch tools and accessories used for precision fastening in an assembly environment. Makita assembly tools combine power, accuracy and ergonomics to deliver solutions that lower costs, enhance ergonomics, reduce trip hazards and increase productivity when compared to air tools. Whether precision fastening, or general MRO needs for you factory, with over 200 tool solutions on one charging platform, no other brand comes close to what Makita can provide to support all of the tooling needs within your manufacturing facility.

Features

  • UL Listed for use within Class I, Division 2 environments
  • Meets NEC Article 513 Aircraft Hangar requirements for Class I, Division 2 environments
  • Tested to Mil Standard 810F, Method 511.4
  • Saves time by replacing need for speed wrench/torque wrench application with one-step fastening to specific target torque level
  • Achieves Cm > 1.67 when measured within +/- 10% tolerance range
  • Application expectations achieve consistent fastenings within 5% of mean torque
  • Automatic shut off of tool when preset fastening torque is achieved to ensure consistent repeatability
  • Auto Battery Shut off (ABS) disables the tool once battery capacity drops below 5%
  • Pass/fail lamp indicates sufficient and insufficient fastening achievement
  • Precision sensor informs operator of insufficient battery charge level through visual and audible indicators
  • Built-in L.E.D. light illuminates the work area for greater productivity in low-light applications
  • Only use genuine Makita batteries and chargers

Includes

Specs

  • Voltage : 12V
  • Drive Size (in.)  : 1/4" Hex Shank
  • Fastening Torque, Adjustable (N•m/in.lbs.) : .8-4.5/7-40
  • No Load Speed : 400 RPM
  • LED light : Yes
  • LED Pass/Fail : Yes
  • Audible Signal : Yes
  • UL Approved (Class I, Division 2 environments) : Yes
  • Length (with battery) : 17-15/32"
  • Height (with battery) : 10-15/32"
  • Width (with battery) : 2-13/16"
  • Net Weight (with battery) : 3.3 lbs.
  • Battery (accessory number) : 193929-8 (BH1220C), 193931-1 (BH1230C)
  • Shipping Weight : 16.31 lbs.
  • UPC Code : 088381-082693
  • Resources & Media

    Page of Start over